Gibt es Risiken bei der Verwendung von Y-Kabeln mit USB-Peripheriegeräten?

Inhaltsverzeichnis:

Video: Gibt es Risiken bei der Verwendung von Y-Kabeln mit USB-Peripheriegeräten?

Video: Gibt es Risiken bei der Verwendung von Y-Kabeln mit USB-Peripheriegeräten?
Video: "Windows 10 Pro" automatische Updates deaktivieren 2024, März
Gibt es Risiken bei der Verwendung von Y-Kabeln mit USB-Peripheriegeräten?
Gibt es Risiken bei der Verwendung von Y-Kabeln mit USB-Peripheriegeräten?
Anonim
Manchmal kann es verwirrend sein, wenn eine technische Spezifikation die Verwendung eines bestimmten Zubehörteils „verbietet“. Dennoch scheint jeder die Verwendung des fraglichen Artikels für völlig in Ordnung zu halten. Wer ist am Ende richtig? Der heutige Q & A-Beitrag von SuperUser hat die Antwort auf eine besorgte Leserfrage.
Manchmal kann es verwirrend sein, wenn eine technische Spezifikation die Verwendung eines bestimmten Zubehörteils „verbietet“. Dennoch scheint jeder die Verwendung des fraglichen Artikels für völlig in Ordnung zu halten. Wer ist am Ende richtig? Der heutige Q & A-Beitrag von SuperUser hat die Antwort auf eine besorgte Leserfrage.

Die heutige Question & Answer-Sitzung wird von SuperUser zur Verfügung gestellt - einer Unterteilung von Stack Exchange, einer Community-basierten Gruppierung von Q & A-Websites.

Foto mit freundlicher Genehmigung von Dennis S. Hurd (Flickr).

Die Frage

Der SuperUser-Reader muttley91 möchte wissen, ob bei der Verwendung von Y-Kabeln mit USB-Peripheriegeräten Risiken bestehen:

I have been advised to use a Y-cable to power a portable USB hard drive from two ports since it is unable to draw enough power from a single port. Are there any risks or dangers of overloading or damaging the hard drive by using a Y-cable this way?

Bestehen Risiken bei der Verwendung von Y-Kabeln mit USB-Peripheriegeräten?

Die Antwort

Die SuperUser-Mitwirkenden misha256 und Dmitry Grigoryev haben die Antwort für uns. Zuerst misha256:

The USB specification prohibits the use of Y-cables:

Use of a Y-cable (a cable with two A-plugs) is prohibited on any USB peripheral. If a USB peripheral requires more power than allowed by the USB specification to which it is designed, then it must be self-powered.

But the real world said “forget your silly rules” and uses Y-cables all the time. Technically, there is pretty much zero risk of anything bad happening, just do not use Y-cables via an unpowered USB hub. Plug the connectors straight into the computer’s USB ports.

“Are there any risks or dangers of overloading or damaging the hard drive by using a Y-cable this way?”

Using a Y-cable does not increase the voltage, it only makes more current available, so it is all good. The hard drive will take as much current as it needs.

You are far more likely to damage the contents of a hard drive by running it under-powered. There is nothing worse than write operations failing midway through. So I implore you, use the Y-cable.

Gefolgt von der Antwort von Dmitry Grigoryev:

Y-cables are forbidden by the USB specification for a reason. Connecting the A-plugs of a Y-cable into two different host ports (i.e. two different computers, a computer and a hub, etc.) can lead to multiple electrical problems:

  1. One of the hosts may be unpowered while the other one is powered on. This will result in the powered host pushing current to the unpowered one in the wrong direction, possibly resulting in damage.
  2. Even if both hosts are powered, one will provide a slightly higher voltage than the other, resulting in a problem similar to problem #1 above (perhaps less severe).
  3. If you are extremely unlucky, you may get two computers with poorly isolated PSUs connected to different mains (120V or 240V) networks. Connecting those with a common ground cable (which is a Y-shaped USB) will zap both computers instantly. Though in this case I would be more concerned about electrical safety in general rather than about Y-cable usage.

If you make sure to connect both A-plugs to the same USB host, using a Y-cable is fine (I have one myself). Do not worry about over-powering the drive, it will take just as much current as it needs.

Haben Sie etwas zur Erklärung hinzuzufügen? Ton aus in den Kommentaren. Möchten Sie mehr Antworten von anderen technisch versierten Stack Exchange-Benutzern lesen? Hier geht es zum vollständigen Diskussionsthread.

Empfohlen: